OPTIMIZED AIR FLOW
Two 120mm fans aligned vertically on the front to draw in air evenly across the entire face of the enclosure. That will contribute to positive air pressure within the case, the rising warm air will always be exhausted with the rear and top airflow from the MAG Forge 100 Series.
READY FOR OPTIMIZED MOTHERBOARD
Designed with multiple easy installation mechanisms and accommodated an up to ATX motherboard to provide an unhindered building experience. Support ATX / Micro ATX / Mini-ITX.
BUILT FOR A PRIME FAN AND RADIATOR CAPACITY
COOLING LAYOUT
Front: Up to 3 x 120 mm or 2 x 140 mm
Top: Up to 2 x 120 mm or 2 x 140 mm
Rear: 1 x 120 mm
PRE-INSTALL FAN
Front: 2 x 120 mm RGB LED Fan included
Rear: 1 x 120mm System Fan included
RADIATOR LAYOUT
Top - support 120 / 240 mm radiator
Front - support 120 / 240 mm radiator
Rear - support 120 radiator
TOOL-LESS TEMPERED GLASS
The light gray tone of 4mm tempered glass side panel is ideal for displaying RGB lighting effects and provides clear internal component construction.
(depending on memory module)
DESIGNED FOR HIGH-PERFORMANCE OVERCLOCKING
VENGEANCE LPX memory is designed for high-performance overclocking. The heatspreader is made of pure aluminum for faster heat dissipation, and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for peak performance potential.
XMP 2.0 SUPPORT
One setting is all it takes to automatically adjust to the fastest safe speed for your VENGEANCE LPX kit. You’ll get amazing, reliable performance without lockups or other strange behavior.
ALUMINUM HEAT SPREADER
Overclocking overhead is limited by operating temperature. The unique design of the VENGEANCE LPX heat spreader optimally pulls heat away from the ICs and into your system’s cooling path, so you can push it harder.
LOW-PROFILE DESIGN
The small form factor makes it ideal for smaller cases or any system where internal space is at a premium.
Efficient performance for thinner notebooks and systems
Kingston’s NV1 NVMe™ PCIe SSD is a substantial storage solution that offers read/write1 speeds up to 2,100/1,700MB/s, which is 3 to 4 times faster than a SATA-based SSD, and 35 times faster than a traditional hard drive. NV1 works with lower power, lower heat, and quicker loading time. The efficient performance and single-sided M.2 2280 (22x80mm) design makes NV1 ideal for thin notebooks and systems with limited space.
Easily integrate into designs with M.2 connectors. Perfect for thin laptops and small form factor PCs.
80 Plus Gold certified ensures to deliver 90% efficiency at 50% load. The better power efficiency leads to less power waste, less heat and less fan noise. And with the support of Intel processors, it will save more energy and more money.
All the black flat cables are modular design. Installing only the cables you need to reduce clutter, to increase the airflow and to improve the chassis thermal performance.
The fan speed is adjusted according to the automatic power detection and will stop when the system is idle or under low load (less than 20% load). The Hydraulic Bearing fan provides longer and more stable life time.
PRODUCT NAME
FORM FACTOR
MOTHERBOARD FORM FACTOR SUPPORT
I/O PORTS
2 x USB 3.2 Gen1 Type-A (5 Gbps)
1 x Audio-out
1 x Mic-in
DRIVE MOUNT SUPPORT
EXPANSION SLOTS
7
MAXIMUM GPU LENGTH
MAXIMUM CPU COOLER HEIGHT
POWER SUPPLY SUPPORT
ATX
MAXIMUM PSU LENGTH
FAN SIZE SUPPORT
Front: 3 x 120 mm / 2 x 140 mm
Top: 2 x 120 mm / 2 x 140 mm
Rear: 1 x 120 mm
PRE-INSTALLED FAN SIZE
Front: 2 x 120 mm
Rear: 1 x 120 mm
PRE-INSTALLED FAN TYPE
Front: 2 x RGB Fan
Rear: 1 x Non LED Fan
RADIATOR SIZE SUPPORT
Front: 120 / 140 / 240 mm
Top: 120 / 240 mm
Rear: 120 mm
DIMENSIONS (DXWXH)
NET WEIGHT
CPU
Expansion Slots
Form Factor | M.2 2280 |
Interface | NVMe™ PCIe Gen 3.0 x 4 Lanes |
Capacities | 1TB |
Sequential Read/Write | 1TB |
Endurance |
1000GB – 240TBW |
Power Consumption |
1000GB: 5mW Idle / 220mW Avg / 1.1W (MAX) Read / 3.3W (MAX) Write |
Storage Temperature | -40°C~85°C |
Operating Temperature | 0°C~70°C |
Dimensions | 22mm x 80mm x 2.1mm |
Weight | 7g (All capacities) |
Vibration Operating | 2.17G (7-800 Hz) |
Vibration Non-operating | 20G (20-1000Hz) |
Product Dimensions | 129×77×157.5 mm |
Heatsink Dimensions | 127×50×155 mm |
Net Weight | 650 g |
Heatpipe | Ø6 mm×4 pcs |
Fan Dimensions | 120×120×25mm |
Fan Speed | 500~1650 RPM±10% |
Fan Airflow | 64.5 CFM |
Fan Air Pressure | 2.1 mmAq |
Fan Noise | ≤27.8 dB(A) |
Fan Connector | 4-pin PWM |
Bearing Type | Hydro Bearing |
Fan Rated Voltage | 12 VDC |
Fan Rated Current | 0.14 A |
Fan Power Consumption | 1.68 W |
LED Type | RGB LED |
LED Connector | 4-pin(+12V-G-R-B) |
LED Rated Voltage | 12 VDC |
LED Power Consumption | 1.56W |
Price |
---|
SKU |
Rating |
Tags |
Short Description |