MSI FORGE GAMING PC. i5-11TH/8GB/1TB/RTX 3050/W10 PRO
GAMING CASE
MSI MAG FORGE 100M RGB 
OPTIMIZED AIR FLOW
Two 120mm fans aligned vertically on the front to draw in air evenly across the entire face of the enclosure. That will contribute to positive air pressure within the case, the rising warm air will always be exhausted with the rear and top airflow from the MAG Forge 100 Series.
READY FOR OPTIMIZED MOTHERBOARD
Designed with multiple easy installation mechanisms and accommodated an up to ATX motherboard to provide an unhindered building experience. Support ATX / Micro ATX / Mini-ITX.
BUILT FOR A PRIME FAN AND RADIATOR CAPACITY
COOLING LAYOUT
Front: Up to 3 x 120 mm or 2 x 140 mm
Top: Up to 2 x 120 mm or 2 x 140 mm
Rear: 1 x 120 mm
PRE-INSTALL FAN
Front: 2 x 120 mm RGB LED Fan included
Rear: 1 x 120mm System Fan included
RADIATOR LAYOUT
Top - support 120 / 240 mm radiator
Front - support 120 / 240 mm radiator
Rear - support 120 radiator
TOOL-LESS TEMPERED GLASS
The light gray tone of 4mm tempered glass side panel is ideal for displaying RGB lighting effects and provides clear internal component construction.
PROCESSOR
INTEL CORE i5-11600K 3.90 GHZ
MOTHERBOARD
GIGABYTE B560 HD3
Direct 6+2 Phases Digital VRM Solution with Low RDS(on) MOSFETs
- Digital PWM Controller to deliver appropriate voltage to the CPU.
- Direct 6+2 Phases Low RDS(on) MOSFETs without PWM Doublers, each power phase connects directly to the CPU.
- All-solid capacitors to improve transient response and minimize oscillation.
- 8-pin Solid Pin CPU Power Connector.
Smart Fan 6
-
High Current SupportEach fan headers support PWM and DC fan and Water cooling Pump , and up to 24W (12V x 2A) with Over-Current Protection
-
Precision ControlUp to 7 temperature/fan speed control points for precise fan curve
-
Dual Curve ModeSlope/Stair dual mode for different user scenario
-
Fan StopFan can stop completely below users' specified temperature point
Support for DDR4 XMP Up to 4600MHz and Beyond
(depending on memory module)
RAM
CORSAIR VENGEANCE LPX 8GB(1X8GB) DDR4 3200MHz
DESIGNED FOR HIGH-PERFORMANCE OVERCLOCKING
VENGEANCE LPX memory is designed for high-performance overclocking. The heatspreader is made of pure aluminum for faster heat dissipation, and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for peak performance potential.
XMP 2.0 SUPPORT
One setting is all it takes to automatically adjust to the fastest safe speed for your VENGEANCE LPX kit. You’ll get amazing, reliable performance without lockups or other strange behavior.
ALUMINUM HEAT SPREADER
Overclocking overhead is limited by operating temperature. The unique design of the VENGEANCE LPX heat spreader optimally pulls heat away from the ICs and into your system’s cooling path, so you can push it harder.
LOW-PROFILE DESIGN
The small form factor makes it ideal for smaller cases or any system where internal space is at a premium.
STORAGE
KINGSTON NV1 NVMe PCIe SSD 1TB
Efficient performance for thinner notebooks and systems
Kingston’s NV1 NVMe™ PCIe SSD is a substantial storage solution that offers read/write1 speeds up to 2,100/1,700MB/s, which is 3 to 4 times faster than a SATA-based SSD, and 35 times faster than a traditional hard drive. NV1 works with lower power, lower heat, and quicker loading time. The efficient performance and single-sided M.2 2280 (22x80mm) design makes NV1 ideal for thin notebooks and systems with limited space.
Ideal for systems with limited space
Easily integrate into designs with M.2 connectors. Perfect for thin laptops and small form factor PCs.
GRAPHIC CARD
ZOTAC GAMING GEFORCE RTX 3050 TWIN EDGE 8GB GDDR6
CPU COOLING
DEEPCOOL GAMMAXX GTE V2
POWER SUPPLY
GIGABYTE P750GM 80 PLUS GOLD
80 PLUS GOLD CERTIFIED
80 Plus Gold certified ensures to deliver 90% efficiency at 50% load. The better power efficiency leads to less power waste, less heat and less fan noise. And with the support of Intel processors, it will save more energy and more money.
FULLY MODULAR DESIGN
All the black flat cables are modular design. Installing only the cables you need to reduce clutter, to increase the airflow and to improve the chassis thermal performance.
120MM SMART HYDRAULIC BEARING (HYB) FAN
The fan speed is adjusted according to the automatic power detection and will stop when the system is idle or under low load (less than 20% load). The Hydraulic Bearing fan provides longer and more stable life time.
OPERATING SYSTEM
WINDOWS 10 PRO
SPECIFICATIONS
GAMING CASE
PRODUCT NAME
FORM FACTOR
MOTHERBOARD FORM FACTOR SUPPORT
I/O PORTS
2 x USB 3.2 Gen1 Type-A (5 Gbps)
1 x Audio-out
1 x Mic-in
DRIVE MOUNT SUPPORT
EXPANSION SLOTS
7
MAXIMUM GPU LENGTH
MAXIMUM CPU COOLER HEIGHT
POWER SUPPLY SUPPORT
ATX
MAXIMUM PSU LENGTH
FAN SIZE SUPPORT
Front: 3 x 120 mm / 2 x 140 mm
Top: 2 x 120 mm / 2 x 140 mm
Rear: 1 x 120 mm
PRE-INSTALLED FAN SIZE
Front: 2 x 120 mm
Rear: 1 x 120 mm
PRE-INSTALLED FAN TYPE
Front: 2 x RGB Fan
Rear: 1 x Non LED Fan
RADIATOR SIZE SUPPORT
Front: 120 / 140 / 240 mm
Top: 120 / 240 mm
Rear: 120 mm
DIMENSIONS (DXWXH)
NET WEIGHT
MOTHERBOARD
-
CPU
LGA1200 package:- 11th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors
- 10th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors / Intel® Core™ i3 processors/ Intel® Pentium® processors / Intel® Celeron® processors*
* Limited to processors with 4 MB Intel® Smart Cache, Intel® Celeron® G5xx5 family. - L3 cache varies with CPU
-
Chipset
- Intel® B560 Express Chipset
-
Memory
- 11th Generation Intel® Core™ i9/i7/i5 processors:
Support for DDR4 4600(O.C.) / 4500(O.C.) / 4400(O.C.) / 4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz - 10th Generation Intel® Core™ i9/i7 processors:
Support for DDR4 2933/2666/2400/2133 MHz memory modules - 10th Generation Intel® Core™ i5/i3 /Pentium®/Celeron® processors:
Support for DDR4 2666/2400/2133 MHz memory modules - 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
- Dual channel memory architecture
- Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
- Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
- Support for Extreme Memory Profile (XMP) memory modules
- 11th Generation Intel® Core™ i9/i7/i5 processors:
-
Onboard GraphicsIntegrated Graphics Processor-Intel® HD Graphics support:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
* The DVI-D port does not support D-Sub connection by adapter. - 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
* Support for DisplayPort 1.2 version and HDCP 2.3
* When the D-Sub port and DisplayPort are connected at the same time, images will output from the DisplayPort only. - 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz
* Support for HDMI 1.4 version and HDCP 2.3.
(Graphics specifications may vary depending on CPU support.)
-
Audio
- Realtek® Audio CODEC
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out
-
LAN
- Realtek® GbE LAN chip (1000 Mbit/100 Mbit)
-
Expansion Slots
- 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
(The PCIEX16 slot conforms to PCI Express 4.0 standard.)(Note) - 1 x PCI Express x16 slot, running at x4 (PCIEX4)
- 2 x PCI Express x1 slots
(The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.)
- 1 x PCI Express x16 slot, running at x16 (PCIEX16)
-
Storage InterfaceCPU:
- 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_CPU)(Note)
- 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB)
- 6 x SATA 6Gb/s connectors
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
* System acceleration with Intel® Optane™ Memory can only be enabled on the M2P_CPU connector and with an 11th Generation Intel® processor installed. -
USBChipset:
- 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
- 6 x USB 2.0/1.1 ports available through the internal USB headers
- 2 x USB 2.0/1.1 ports on the back panel
-
Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x CPU fan header
- 1 x water cooling CPU fan header
- 3 x system fan headers
- 1 x addressable LED strip header
- 1 x RGB LED strip header
- 2 x M.2 Socket 3 connectors
- 6 x SATA 6Gb/s connectors
- 1 x front panel header
- 1 x front panel audio header
- 1 x USB 3.2 Gen 1 header
- 3 x USB 2.0/1.1 headers
- 1 x S/PDIF Out header
- 2 x Thunderbolt™ add-in card connectors
- 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
- 1 x serial port header
- 1 x parallel port header
- 1 x Clear CMOS jumper
- 1 x Q-Flash Plus button
-
Back Panel Connectors
- 2 x USB 2.0/1.1 ports
- 1 x PS/2 keyboard/mouse port
- 1 x D-Sub port
- 1 x DVI-D port
- 1 x DisplayPort
- 1 x HDMI port
- 4 x USB 3.2 Gen 1 ports
- 1 x RJ-45 port
- 6 x audio jacks
-
I/O Controller
- iTE® I/O Controller Chip
-
H/W Monitoring
- Voltage detection
- Temperature detection
- Fan speed detection
- Overheating warning
- Fan fail warning
- Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
-
BIOS
- 1 x 256 Mbit flash
- Use of licensed AMI UEFI BIOS
- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
-
Unique Features
- Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
@BIOS
EasyTune
Fast Boot
Game Boost
ON/OFF Charge
RGB Fusion
Smart Backup
System Information Viewer - Support for Q-Flash Plus
- Support for Q-Flash
- Support for Xpress Install
- Support for APP Center
-
Bundled Software
- Norton® Internet Security (OEM version)
- Realtek® 8118 Gaming LAN bandwidth Control Utility
-
Operating System
- Support for Windows 10 64-bit
-
Form Factor
- ATX Form Factor; 30.5cm x 22.5cm
-
NoteSupported by 11th Generation processors only.
RAM
STORAGE
Form Factor | M.2 2280 |
Interface | NVMe™ PCIe Gen 3.0 x 4 Lanes |
Capacities | 1TB |
Sequential Read/Write | 1TB |
Endurance |
1000GB – 240TBW |
Power Consumption |
1000GB: 5mW Idle / 220mW Avg / 1.1W (MAX) Read / 3.3W (MAX) Write |
Storage Temperature | -40°C~85°C |
Operating Temperature | 0°C~70°C |
Dimensions | 22mm x 80mm x 2.1mm |
Weight | 7g (All capacities) |
Vibration Operating | 2.17G (7-800 Hz) |
Vibration Non-operating | 20G (20-1000Hz) |
GRAPHICS CARD
-
GPUGeForce RTX 3050
-
CUDA cores2560
-
Video Memory8GB GDDR6
-
Memory Bus128-bit
-
Engine ClockBoost: 1777 MHz
-
Memory Clock14 Gbps
-
PCI Express4.0 8x
-
Display Outputs3 x DisplayPort 1.4a (up to 7680x4320@60Hz)
1 x HDMI® Connector*
*Supports 4K 120Hz HDR, 8K 60Hz HDR, and Variable Refresh Rate as specified in the HDMI 2.1 Specification -
HDCP Support2.3
-
Multi Display CapabilityQuad Display
-
Recommended Power Supply450W
-
Power Consumption130W
-
Power Input8-pin
-
DirectX12 Ultimate
-
OpenGL4.6
-
CoolingIceStorm 2.0
-
Slot SizeDual Slot
-
SLINot Supported
-
Supported OSWindows 11 / 10 (64-bit, April 2018 update or later)
-
Card Length224.1mm x 116.3mm x 39.2mm / 8.8" x 4.6" x 1.5"
-
AccessoriesManual
COOLING SYSTEM
Product Dimensions | 129×77×157.5 mm |
Heatsink Dimensions | 127×50×155 mm |
Net Weight | 650 g |
Heatpipe | Ø6 mm×4 pcs |
Fan Dimensions | 120×120×25mm |
Fan Speed | 500~1650 RPM±10% |
Fan Airflow | 64.5 CFM |
Fan Air Pressure | 2.1 mmAq |
Fan Noise | ≤27.8 dB(A) |
Fan Connector | 4-pin PWM |
Bearing Type | Hydro Bearing |
Fan Rated Voltage | 12 VDC |
Fan Rated Current | 0.14 A |
Fan Power Consumption | 1.68 W |
LED Type | RGB LED |
LED Connector | 4-pin(+12V-G-R-B) |
LED Rated Voltage | 12 VDC |
LED Power Consumption | 1.56W |
POWER SUPPLY UNIT
-
ModelGP-P750GM
-
TypeIntel Form Factor ATX 12V v2.31
-
PFCActive PFC (>0.9 typical)
-
Input Voltage100-240 Vac (full range)
-
Input Current12-6 A
-
Input Frequency60-50 Hz
-
Output Capacity750W
-
Dimension150 x 140 x 86 mm
-
Fan Type120mm Hydraulic Bearing ( HYB ) fan
-
80 PLUSGold
-
Efficiency90% at typical load