SALICRU UPS SLC 5000 TWIN PRO2 B1 double-conversion 4 to 10kVA
UPS SLC 5000 TWIN PRO2 B1 double-conversion 4 to 10kVA
Enhanced protection for mid-range systems with single-phase power supply
Salicru's SLC 5000 TWIN PRO2 5kVA UPS features on-line double conversion technology, currently the most advanced for the protection of critical systems as it provides a fully stabilised and filtered sinusoidal supply voltage.
The Salicru SLC TWIN PRO2's output voltage is always single-phase, featuring a single-phase input of 5 kVA. The SLC 5000 TWIN PRO2 5kVA UPS provides a unitary output power factor, the most optimum for systems and environments with high energy needs. Adaptability is another important feature thanks to the numerous operating modes available: On-line, Batteries, Eco-mode, Bypass, Frequency converter and Parallel redundant.
The possibilities of control and monitoring are varied: on the one hand, an LCD display + keypad for local operation of the device, and, on the other, various communication options (USB HID and RS-232 interfaces, and slot for SNMP, RS-485 and AS-400 cards) that enable the UPS to be integrated into standard or virtualised platforms for management, incident notification and remote maintenance.
Features
- On-line double conversion and DSP control technology.
- Output power factor PF=1
- Compact tower format for space saving.
- Active power factor corrector for all input phases.
- Multiple operating modes for better adaptability.
- Equipped for parallel operation as standard, up to 3 devices.
- USB and RS-232 interface for all models as standard.
- Monitoring software for Windows, Linux, Unix and Mac.(downloadable)
- Intelligent slot for SNMP/RS-485/optocoupler cards.
- Eco-mode operation for increased efficiency.
- Backup extensions available for all power ratings.
- Frequency conversion function.
- EPO – emergency power off.
- Manual and/or automatic programmable battery test.
- SLC Greenergy solution.
Operating Modes
On-line double-conversion
Double voltage conversion (AC/DC + DC/AC), providing the best degree of safety to loads
Bypass
In the event of any eventuality (incident, overload, etc.), the loads continue to be powered by the input voltage.
Eco-Mode
Increased efficiency up to 99%, with immediate availability of full power.
Batteries
In the event of power failure, the loads continue to be powered by means of batteries
Frequency Converter
Adaptation of the output frequency to the needs of the load (50/60 Hz or 60/50 Hz).
Parallel Redundant
Increased safety (N+1) or capacity, with configurations of up to 3 devices.
Applications
Salicru's SLC TWIN PRO2 series is the best option for providing a secure power supply to ERP systems, Business Intelligence, CRM solutions, intranets/extranets and corporate networks in the event of a wide range of possible disturbances (micro power outages, voltage fluctuations, frequency variations, harmonics, transients, etc.), which can cause irreparable damage or incur high costs in all of these critical systems.
Technical Specification
| UPS Power (VA / W) | 5000 / 5000 | ||
| Technology | On-line, double conversion, PFC with double DC bus | ||
| Format | Tower | ||
| Input | Rated Voltage | 208 / 220 / 230 / 240 V (1) | |
| Voltage range | 110 ÷ 276 V (2) | ||
| Total harmonic distortion (THDi) | <4% | ||
| Power Factor | ≥0.99 | ||
| Frequency | 50 / 60 Hz ±10% | ||
| Input protection | Resettable breaker | ||
| Output | Rated voltage | 208 / 220 / 230 / 240 V (1) | |
| Voltage accuracy (battery mode) | ±1% | ||
| Power factor | 1 | ||
| Total harmonic distortion (THDv) | ≤1% linear load; ≤4% non-linear load |
||
| Performance (normal mode) | 93% ÷ 94% | ||
| Permissible overloads (normal mode) |
Up to 110% for 10 min; 130% for 1 min |
||
| Parallel | Yes, up to 3 units (3) | ||
| Synchronisation | with mains | ±4 Hz | |
| without mains | ±0.1 Hz | ||
| Programmable priority outputs | No | ||
| Crest factor | 3 to 1 | ||
| Manual Bypass | Yes | ||
| Bypass | Type | Hybrid | |
| Transfer time | Nil | ||
| Battery | Battery type | Pb-Ca sealed, AGM, maintenance-free | |
| Protection | Against power surges, undervoltages and alternating current components | ||
| Charging | Charge type | I/U (constant current/constant voltage) | |
| Recharge time | 7-9 hours to 90% | ||
| Temperature voltage compensation | Yes | ||
| Communication | Interface | USB, RS-232 and relay | |
| Intelligent slot | Yes, ready for SNMP / AS400 / RS485-Modbus | ||
| Downloadable monitoring software | For Windows, Unix, Linux and Mac | ||
| Other Functions | Eco-mode 4 | Yes | |
| Frequency converter | Yes (4) | ||
| Cold start | Yes | ||
| General | Operating temperature | 0ºC - 40ºC | |
| Relative humidity | Up to 95%, non-condensing | ||
| Noise level at 1 metre | Less than 60dB | ||
| Dimensions (D x W x H mm) | 592 x 250 x 576 | ||
| Weight | 82Kg | ||
| Standards | Safety | EN 62040-1; EN 60950-1 | |
| Electromagnetic compatibility (EMC) | EN 62040-2 Category C3 | ||
| Operation | VFI in accordance with EN 62040-3 | ||
| Quality & Environmental Management | ISO-9001 and ISO-14001 | ||
(1) Power reduction to 90% for 208 V input
(2) With 50% load
(3) Power reduction to 90%
(4) Power reduction to 60%
